vgcrepairs

http://team-xecuter....20d_drivers.rar

We have only 2 files needed a SLIM and a PHAT.

Quick refence guides are here: SLIM and PHAT

Complete Guide: (WIP): Grab HERE

herehereDownloads section
Gecko 1.16 Released, New Tool Trident MX and Slim Liteon Full Firmware dumper !



We are proud to announce the release of Gecko 1.16 we have done tons of internal changes on it but the most important are 2 new features:



Support for a new Tool in the Maximus product range: Trident MX. This small tool will make a unlocking of the Slim Liteon with Macronix SPI a breeze. (Compatible with Lizard and JungleFlasher)

Also included is a new awesome feature: The Full Dump of Slim Lite-on DG-16D4S. (Full credit of this goes to Geremia for the tarablinda application). Due to the new 0225 variants discovered, we strongly recommend get a full dump of your drive before flashing it whenever you can (in order to be able to full dump you require the board has its SPI Flash Unlocked)..








Full Specification of Trident MX:

Trident MX by Team-maximus (AVAILABLE TODAY !!!)

We have this design produced long time ago, we were waiting to release in package with Winbond solution but due to the the latest leaks on the Macronix method we have choosen to release as is. It is Based on the Macronix Power trick , we have created a professional, safe, simple to use, and reusable tool.

The Trident MX tool will Unlock the Write-protected Lite-on Slim drives DG-16D4S that comes with a Macronix internal SPI Flash. Until recently locked drives where only found in the firmware’s 0225, 0401 and 1071, but the latest dashboard update (2.0.13599) has locked the 9504 drives with 0272 firmware, The Trident MX is a MUST have in your arsenal of weapons.

Combined with the POWER of Maximus Lizard (Gecko 1.16 and above) and in a few days supported by Jungleflasher, this is the perfect tool to do the job professionally and without hassle.

Forget about tricking the drive with unsafe methods of picking and choosing different resistors; We have an adjustable trimmer installed (Ships pre-set to proper value for optimum performance). There is no need to run a complex application to do the Macronix Unlock - Maximus Lizard does the magic for you.

The Trident MX is a tool designed for pro-modders but will be loved be even by the newest Modder !!

Features:
a) Designed to work with Macronix Power trick (requiring only 1 cut)
Precision controlled Shoot time; will not cause overheating of the Voltage Regulators
c) Automatic Control - "just push down” operation
d) Also support’s a manual mode with a simple button press
e) Retry system with automatic safe-tested time increments.
f) Adjustable resistor values (shipped pre-set to optimum performance)
g) The perfect companion tool for Lizard and Jungleflasher g) Shipped in a protective case for storage between uses

Note: This tool works only with Macronix SPI Flash. (For Winbond we are still developing a proper and safe solution to be announced at another time.)

Download Manual in our Downloads section
Other pictures of the device: here and here

<iframe width="560" height="349" src="http://www.youtube.com/embed/MVBDYGpJ1YU?rel=0" frameborder="0" allowfullscreen></iframe>

How to proceed Updating to the 13599 Dash by reddeath, maximus, vgcrepairs
-------------------------------------------------------------------------------
W A R N I N G R E A D F I R S T ! ! !
If you have a Slim Liteon Drive 9504 (or flashed as 0272) and update to Dash 13599
your drive will be LOCKED so just proceed to go to that dash version if you
have a replacement board or spare drive to flash back the custom firmware later

If you are using a chinese unlocked 9504 as spare drive OR you are changing the
IC for an unlocked MT1335WE then better do the update to the dash 13599 first
(before you proceed to replace the IC)
-------------------------------------------------------------------------------

Tools you need:
A) Toolbox 1.30 or above: Get from Lizard Download page: http://360lizard.com...e/downloads.php

Also you will need the latest Filesets, grab them from our blog: http://cfwfileset.blogspot.com


Before proceeding you will First need to know 2 things:
a) What dashboard your console has (My Xbox -> System Setting -> Console Information)
What Physical Drive you have (Phat liteon 74,83,93, slim 9504, benq etc) that information came on your drive barcode label


--------------------------------------------------------------
IF YOUR CONSOLE HAS A DASHBOARD EARLIER THAN 13146
--------------------------------------------------------------
You need put the original firmware on your drive before update
as follows:

Phat Liteon 74 ----> Generate a Original Phat Liteon 74 file
Phat Liteon 83 ----> Generate a Original Phat Liteon 83 file
Phat Liteon 83v2 ----> Generate a Original Phat Liteon 83v2 file
Phat Liteon 93 ----> Generate a Original Phat Liteon 93 file
Slim Liteon 9504 ----> Generate a Original Phat Liteon 9504 file
Slim Liteon 0225 ----> leave as is
Slim Liteon 0401 ----> leave as is
Benq 62430 ----> Generate a Original Benq 62430
Benq 64930 ----> Generate a Original Benq 64930

Once you put the original file just go ahead with Live update to get
the 13599 dash

as soon as you have the dash update (Verify it goig to My Xbox -> System Setting -> Console Information)
your drive ROM has been updated so you need to generate a custom firmware as follows
Phat Liteon 74 ----> Generate a CFW for 2510 drive
Phat Liteon 83 ----> Generate a CFW for 2510 drive
Phat Liteon 83v2 ----> Generate a CFW for 2510 drive
Phat Liteon 93 ----> Generate a CFW for 2510 drive
Slim Liteon 9504 ----> Generate a CFW for 0272 drive
Slim Liteon 0225 ----> Generate a CFW for 0225 drive
Slim Liteon 0401 ----> Generate a CFW for 0401 drive
Benq 62430 ----> Generate a CFW for Benq 04421
Benq 64930 ----> Generate a CFW for Benq 04421

thats because the dashboard change your rom version (reflash your drive)



--------------------------------------------------------------
IF YOUR CONSOLE IS ON DASHBOARD 13146
--------------------------------------------------------------
You need put the original firmware on your drive before update
as follows:

Phat Liteon 74 ----> Generate a Original for 2510 drive
Phat Liteon 83 ----> Generate a Original for 2510 drive
Phat Liteon 83v2 ----> Generate a Original for 2510 drive
Phat Liteon 93 ----> Generate a Original for 2510 drive
Slim Liteon 9504 ----> Generate a Original for 0272 drive
Slim Liteon 0225 ----> leave as is
Slim Liteon 0401 ----> leave as is
Benq 62430 ----> Generate a Original Benq 04421
Benq 64930 ----> Generate a Original Benq 04421

Once you put the original file just go ahead with Live update to get
the 13599 dash

as soon as you have the dash update (Verify it goig to My Xbox -> System Setting -> Console Information)
your drive ROM has been updated so you need to generate a custom firmware as follows
Phat Liteon 74 ----> Generate a CFW for 2510 drive
Phat Liteon 83 ----> Generate a CFW for 2510 drive
Phat Liteon 83v2 ----> Generate a CFW for 2510 drive
Phat Liteon 93 ----> Generate a CFW for 2510 drive
Slim Liteon 9504 ----> Generate a CFW for 0272 drive
Slim Liteon 0225 ----> Generate a CFW for 0225 drive
Slim Liteon 0401 ----> Generate a CFW for 0401 drive
Benq 62430 ----> Generate a CFW for Benq 04421
Benq 64930 ----> Generate a CFW for Benq 04421