2 replies to this topic

[jazzaamiga]

can 360 lizard downgrade firmware might work on liteon Scorpion 2 try pick up first time key because have problem.

i note lizvul said
"Hi!

I have any problem with scorpion 2 and read key of liteon 74850c.

these are the steps that i do:

1.- I go to Liteon menu -> read key with maximus scorpion
2.- i follow the steps (1 on/off drive, 2 contact mpx01 and on/off drive)
3.- problem!!! "maximus lizard says" unlock bad....

i don't get to the third step, you think of anything?

thanks!! "

anyideato stop refuse i want see working so i am willing try go backward and do more test which one working once find which version stop working.

[XxsQuallenxX]

It has nothing to do with the Gecko there is no reason to downgrade.
You are getting a bad connection with the Scorpion
Scratch the top of the MPX01 pad with a small tip screwdriver, exacto, w/e until is shiny
Also make sure you are pushing the probe down all the way, it doesn't make good contact if the spring isn't compressed in the spear IMO
If this doesn't work for some reason your Scorpion may be bad BUT!!!! I doubt it. However if it is take a 10ohm resistor and ground the MPX01 instead of using the Scorpion.
Here's an example of what I mean, the only difference in just using a resistor and this vid is I made a probe, but it's still just a resistor grounding the MPX01

[aneesh]

like he says press the scorpion needle little bit hard on the mpx01 and it will work..i had same probs earlier