27 replies to this topic

[gporras]

i flashed 2 xboxes with lt 3.0 firmware, they were update with the lastest update before i flashed them, they working fine but after i flashed them with lt 3.0 they wont play original or burn game u hear the drive trying to read the games then and then it shows open tray, i flashed it back to it original firmware and it does the same thing and then it shows open tray, second i have flashed and extra drive on both xboxes and they both do the say help

[vgcrepairs]

sounds like keys are wrong - return drive to stock and see if they still work - cause either the drive lasers failed or your keys are wrong

[gporras]

i already tried that and no luck

[gporras]

HELP I FLASHED TO STOCK AND NO LUCK IT WONT PLAY GAMES ORIGINAL OR BURN I CHECKED ALL CABLES AND NOTHING

[vgcrepairs]

then you either damaged the lasers or you didnt get the correct key, nothing more we can help you with

[gporras]

BUT HOW CAN I DAMAGE 4 DRIVES MY USING THE LATEST TOOL BOX, ITS UPDATED , THE XBOX IS UPDATE TO THE LASTEST FIRMWARE AND AM USING THE KEY THAT I EXTRATED YESTERDAY AND THEN I USED THE ORIGINAL KEY I EXTRACTED IN JULY AND IT STILL DOES THE SAME

[Skywalker]

bro, like VGC is saying the only explanations are the lasers are completely killed or the drives have the wrong keys. Are you sure you didnt cross flash keys ? When you flash the drives does the Lizard verify it as a successful flash ?

[gporras]

yes the the lizard flashes and then it verify successful flash, question what u mean with cross flash keys

[Skywalker]

cross flash keys meaning you flashed the wrong key to the wrong drive ? are you sure your using the correct fw dumps with the correct drive ?

[Bow2dking]

Wow that sound really bad .

[chi3f]

Load the firmware in the toolbox and click the advanced view and compare the drive serial number from the firmware to the one on the drive to see if you flashed the wrong drive.

[XxsQuallenxX]

Did you make the correct firmware for the dash version? As in not a 74 after dash 13146, cause it should be 02510c.
After dash 13146 you should be answering yes to both pop up questions when saving a OFW or CFW.

[gporras]

XxsQuallenxX when will i get that pop up u talking about,

[XxsQuallenxX]

When you go to save the firmware, original or custom. It should ask you what dash you are making it for. Open one the CFWs in the toolbox and see if it says LiteOn 74, 83, 93, or 02510c.
Dash 13146 flashed all LO's to 02510c. So, if you made a firmware for say a 74 instead the drive is not going to match what it should be and will not work...ya dig?
I'll assume by now you checked to see if you cross flashed the keys and the Lizard does an AES check. So this seems like it would be the problem, it gives the same symptoms of the wrong key but really it's just a f/w mixup...it's common.
Anyways sorry for the ramble and I hope this solves your problem.

[gporras]

my xbox has dashboard 2.0.14699.00 i checked all the firmwares and nothing

[gporras]

i updated the xbox before i did the firmware flash

[360_bochalism]

ok lets not forget one smal thing here concerning fat liteon drives YOU MUST DISCONECT THE LENS RIBBON FROM THE DRIVE or you wil fry the pots on the lens 90% of the time

[crackle]

360_bochalism, on 05 January 2012 - 03:54 PM, said:

ok lets not forget one smal thing here concerning fat liteon drives YOU MUST DISCONECT THE LENS RIBBON FROM THE DRIVE or you wil fry the pots on the lens 90% of the time

Do you mean the laser ribbon? i always disconnect this when flashing but haven't heard of a lens ribbon unless it's the same thing?

[Liebing]

XxsQuallenxX, on 31 December 2011 - 02:27 AM, said:

When you go to save the firmware, original or custom. It should ask you what dash you are making it for. Open one the CFWs in the toolbox and see if it says LiteOn 74, 83, 93, or 02510c.
Dash 13146 flashed all LO's to 02510c. So, if you made a firmware for say a 74 instead the drive is not going to match what it should be and will not work...ya dig?
I'll assume by now you checked to see if you cross flashed the keys and the Lizard does an AES check. So this seems like it would be the problem, it gives the same symptoms of the wrong key but really it's just a f/w mixup...it's common.
Anyways sorry for the ramble and I hope this solves your problem.

i've done numerous phat lite-ons now and they all work fine with xgd3 patched with agbx... i dont get why these people are having such problems

[polazo]

Same problem here, after update to dashboard 14699 and put lt3.0 in same model, this drive cant read nothing anymore. I have the right key. Could this be another problem?