3 replies to this topic

[diffusore]

hello i have some question.

i have installed 5 stinger and working perfectly.
but the speed of glitch it's variable.

i read that using one capacitor,stabilize the time of glitch.

i ask, What value should I use?

in a phat console??

in a slim console??

and the value??

and from.....to??

i read another post that vgrepair suggest use resistor of 10 ohm in jasper console....
for all type of jasper??
jasper 16mb,64mb,256mb or 512mb??

I really compliment the quality of the chip.
never a failure.
never a problem.

[vgcrepairs]

no matter what glitcher you use your going to have random boots times

for jasper 256 and 512 (There i sno jasper 84) you want to use a 68 nf cap on the cpu_rst line and make sure your grounding A point

[diffusore]

my jasper is 256mb and ....i try 68nf......and i hope to stabilize the glitch....ground in pad A point and positive on cpu reset??.
A point to be connect on the pin 12 on j2c1.
I read all tutorial and .....nothing speaks about pad A point.
What is this??
what is the function??

this fix i can use only for jasper 256mb and 512mb and others type??
Thank you for your kindness.
for slim console?? suggestion??

Consider that in future these stinger will mount chip actel??
for fast booting??

[vgcrepairs]

an actel DOES NOT speed up anything, the entire glitching is based off of consoles timing, not how fast or slow you send signal