3 replies to this topic

[carola]

hello! can u help me? i wanna know if can i program stinger with jtag usb cable without power it in a 3.3v? if i cannot, how can i power it, plug it in the xbox 360 motherboard! help a noob lol!

[itchyf1ngaz]

its easy!. just go to your xbox mother board and solder the 3.3v with the stinger and solder the ground to the video chasis.. then proceed to programming! you do not need to turn on the xbox to program the stinger you can just leave it plugged in and proceed to flashing after that. i suggest to have consisten glitching and lower your glitch times i suggest groung the A pad on the stinger to the chasis also. maximus failed to inform people tabout the A pad! heres a video of my A pad solution!

[vgcrepairs]

itchyf1ngaz, on 07 December 2011 - 06:31 PM, said:

its easy!. just go to your xbox mother board and solder the 3.3v with the stinger and solder the ground to the video chasis.. then proceed to programming! you do not need to turn on the xbox to program the stinger you can just leave it plugged in and proceed to flashing after that. i suggest to have consisten glitching and lower your glitch times i suggest groung the A pad on the stinger to the chasis also. maximus failed to inform people tabout the A pad! heres a video of my A pad solution!

If you read the ENTIRE manual - In the troublshooting area PAD A is to be grounded if not glitching properly !!!!

[itchyf1ngaz]

heres a video i created on how to program the stingers using a TX nandx flasher and coolshrimps Jtag tool