2 replies to this topic

[pjvv1]

Dear friends,

I have an Xbox 360 Phat LiteOn with the latest dashboard (13416). It used to be flashed but with the last update I lost the firmware I changed by using 360 Xtractor + Spear (version 1).

I am trying to flash again the drive with my 360 Xtractor + Spear (version 1). I have read that it is possible but I have not managed.

Each time I try I get a "PhatKey extraction failed" message in JungleFlasher.

I know that I have to probe the point MPX01 as it is said in Jungle Flasher tutorial but I have no success.

Can anybody explain me how to do it rightly?

Thanks in advance.

[pjvv1]

I've done it.

Just have to do all the PMT tutorial, that is, you must add a switch to the #6 wire (3.3v) and use that switch to switch on and off when jungerflasher requires it.

[ThanksAnts]

Does this work on the 8350 lite on drives that have already undergone the dash update? I am trying to flash my original firmware phat lite on, and using the PMT tutorial I am able to get past the 0x52 part but fail when it tries to verify the key. I have just been pulling the power cord out of the back of the dvd drive so that might be making things a bit harder than necessary though.

Here's the JF log if it helps any.

Quote

Drive is Lite-On..
Sending Vendor Intro to port 0x01F0
Status 0x51
Re-sending Vendor Intro:
.............................
Serial flash found with Status 0x52

Extracted drive key failed Verification !