27 replies to this topic

[mr64]

do you mean the two points in module c (jump a), if they are so do i have to remove the two wires red and blue and connect them throw or from jump a ??

((if you can show me a fresh picture it will be much appreciated))

waiting your Answer
thank you

vgcrepairs, on 25 August 2010 - 02:37 AM, said:

i see the picture but you still havent bridged the JUMPR 1 on module C soldered together

[vgcrepairs]

all you do is add a drop of solder between the 2 pads, you DO NOT TOUCH the wires at all, leave them plugged in, the JMPA bypasses the 330ohm resitor

[mr64]

click in this Picture and say yes to let me start working:

http://img843.images...4/photo1361.jpg

steps:
1. drop a solder between the 2 pads to connect them together {jump a} (like it show in the RED CIRCLE).
2. connect a 330ohm resitor 100watt between the 2 points (like it show in the BLUE LINE).

is this correct, and i ll get the cpu after i done this, not the error 79 ?

vgcrepairs, on 26 August 2010 - 12:10 AM, said:

all you do is add a drop of solder between the 2 pads, you DO NOT TOUCH the wires at all, leave them plugged in, the JMPA bypasses the 330ohm resitor

[mr64]

every thing goes fine, i got my cpu

but in the freeboot it says : kv.bin was not decrypted properly, CPU key does not match the dump

i did check it 3 times to be sure, so am sure about my cpu number please any help

thank you

[vgcrepairs]

received your NAND.bin image how did you dump it?

old ibuild says corrupted image and freeboot maker says can not decrypt key,

[deilzfjck]

Have you used the correct version of 360Toolbox and decrypt the key. Simple is always better. He says he gotten it to dump the nand.bin(but did he do it right). But why is he getting E79 still. Are you helping this guy with prepping his NAND for freeboot? he might need some help with using nandpro to dump the original NAND. He probably didnt get the kv.bin or rawcfg.bin. Or he maybe having bad blocks. send a screen shot of NANDPRO doing it's thing during dump.

There should be a log of Nandpro during the reading process.

[vgcrepairs]

he sent me the files and I get same result on all latest software,

I can see all key info with 360 flash tool, so the KVis correct and CPU is correct

I google the issue with freeboot maker and many epople having same issue

so its a bug in freeboot maker

ibuild :
ERROR: Data in Block 724, page 27, plane 0 is corrupted

so I am at a loss here, odd I can see all info with 360 flash tool, looks like XBR3 only for this person

[vgcrepairs]

I was able to dec his kv and inject to a known good dump, emailed file no response on wether it work or not though